Miele Steam Oven | Fault F13 is shown on the display of the steam oven/combination steam oven. The temperature in the oven compartment is too high.

The water intake valve is not fully open.

Open the water intake valve fully and start operation again.

The water nozzle must be descaled if the fault message F13 appears on the display.

Risk of injury caused by hot surfaces and steam.

A great deal of hot steam will escape when the door is opened. The oven compartment walls, food and accessories get very hot during cooking.

Carefully open the door. Use oven gloves when taking food out of the oven and when working in the hot oven compartment.

To descale the nozzle, proceed as follows:

Wait until several buzzer tones sound.

Open the door and remove the food.

Leave the door open to cool down the steam oven.

Remove the side runners.

Pull out the nozzle.

Descale the nozzle using the Miele system descaling agent or with a suitable proprietary descaler.

After descaling, rinse the nozzle under running water.

Before replacing the nozzle, all parts of the steam oven which carry water must be flushed through.

Close the door and switch the steam oven on. Select the Steam cooking operating mode at 100 °C.

Set a duration of 1 minute and press the Start/Stop button.

Wait until the cooling down phase has been completed, then open the door and replace the nozzle and the side runners.

The steam oven can now be used again as normal.

If the fault persists, please contact us or book a repair appointment online.

For thorough and gentle cleaning of your steam oven, we recommend Miele products which also care for your appliance at the same time.