Factory defaults
RX2 and RX3:
The robot vacuum cleaner can be reset to its factory default settings. Have the remote control to hand.
In order to do this, the robot vacuum cleaner must be switched on and must not be in standby mode.
Press and hold the Spot and Turbo sensors in the control field of the robot vacuum cleaner at the same time for at least 5 seconds.
r:St will appear in the display.
Within the next 2 seconds, press the OK button on the remote control until F:tr appears in the display.
The robot vacuum cleaner will start again with its factory default settings restored:
WiFi SSID
WiFi password
Set timers
Saved maps
Information that was exchanged with the cloud during the pairing process is regenerated.
The connection to the cloud is removed.
RX1:
To deactivate the timer, briefly press the Timer button on the remote control. The Timer indicator will go out.
To reset the maximum crossing over height to the factory setting, press the Base button on the remote control for at least 3 seconds. HI appears on the robot vacuum cleaner display.
To reactivate acoustic signals, press the OK button on the remote control for at least 3 seconds. ON appears briefly on the robot vacuum cleaner display.
